Machine description : The equipment is suitable for coating PVC/PU/AC rubber on the surface of fabric with water-based or oil-based rubber, so as to achieve waterproof,breathable and flame-retardant effects, then greatly increase the added value of finished products. Technological process：…
Introduction:
Unwinding: Lamination coating machine has an independent tower double-station unwinding rack, automatic cutting when changing rolls, air expansion shaft and safety chuck for loading and unloading rolls, and unwinding EPC device.
Rewinding: independent tower double-station rewinding rack, flying knife cutting, surface rewinding, constant tension rewinding.
Gluing: The Lamination coating machine adopts the gluing method of the screen roller, and the glue roller is driven by an independent motor and resets pneumatically.
Oven: Six-stage top-opening high constant temperature drying oven, the whole oven adopts negative pressure design, hot air does not blow out of the oven, large air volume and high air pressure can create a low temperature and high wind speed drying method. The guide roller is driven by a separate motor and is driven by a synchronous belt with low noise.
Composite: Lamination coating machine has a three-roll composite press roller device to ensure uniform pressing force over the entire width; S-type double cooling rollers.
Whole machine: PLC programmable controller is used for logic control and protection, four-stage closed-loop tension control and display
Technological process：
1.unwinding → 2. centering device → 3. accumulator → 4. precision coating →5. hot air oven →7. air cooling device → 8. water cooling device →9. winder
Technical data :
| 1. Machinery width | 1800-3600mm |
| 2. Machine speed | 10-100m/min |
| 3. Heat source | Gas, biological powder, heat transfer oil, electric, steam |
| 4. Drying temperature | 120-220℃ |
| 5.Drive mode | Frequency converter motor, stepless adjusting speed |
Machine detail
Application
Product Performance
1.Equipped with accumulator that make the switching cloth fabric quickly, and reduce the lead time of operation.
2.Modular design, mechanism is simple and maintenance is easy.
3.High stability and reliability, low production cost.
4.The machine's color could be assigned by customer
5.High stability and reliability, low production cost.
